Itru Fibre Tester UAK-1 +
Tests
Analyses
Solves
Reports
A Knowledge Based Textile Technology Information System
Innovation
in
Textile Testing and Process Optimisation
UAK-1 is For any type of Fibre and For Any type of color -MORE THAN ONE INSTRUMENT-UNIVERSAL
Length and Length Variation of Histogram,Staple Diagram,Fibre Graph,Fibre Density,Spectrograph Mean, Mode,Median,Skewness,Kurtosis,CV%,Standard Deviation,Dispersion %,Short Fibre Content %,Very short Fibre Content %, %1 SL for Ratch Setting ,ALL STAPLE,FIBRE GRAPH AND HISTOGRAM RELATED LENGTH PARAMETERS.
Fibre Fineness and Maturity:Perimeter,Area of Wall,Theta,Flatness,Causticare Maturity,Maturity Ratio,H,HS,Micronaire,Immature Fibre Content,% of non-mature fibre content ,Histogram of Micronaire and Theta and Variation of all Fineness and Maturity numeric values mean,min,max,standard deviation.
Neps/Length and Neps/Surface and % of Fibre Parallelism to control hooked fibres in slivers
Color Histogram,Mode,Median,Skewness,Kurtosis,% of White Specs,% of Yellow Fibres,Whiteness Index
Non-Lint Content % and Foreign Matter % and % of Blowroom and Card Waste
Measurement of Performance of blowroom,carding,drawing,combing,roving and ring frames with New Technological Terms
Corrected Cotton Fibre Strength for Presley 1/8 inch gauge g per tex with R=0,94
Yarn Strength Index and Yarn Evenness Index and Optimization of Twist in Ring Spinning
Processing and Spinning Ability of Fibres
Color Matching of Analyses of Mixes
Optimization of mixes according to RKM CV% and Imperfections
Optimization of Mass Machine CV% of combing ,drawing ,roving and yarn according to spectrograph which is obtained from fibre properties and comparison with actual and ideal curve for cotton fibres
Ratch Setting Distances and identifying of off-standard running machinery from Bale to Ring Frame Delivery
New Methods of controlling Ratch Setting Distances for Spinning Man-Made Fibres Blends and Cotton and optimization of cut fibre length more than one
New Methods of measurement and evaluation of Neps -Highest and lowest sensitivity -Neps Map
UAK-1 BRINGS NEW CONCEPTION , NEW TERMS AND DEFINITIONS TO TEXTILE TECHNOLOGY
UAK-1 BRINGS NEW CONTROL SYSTEMS TO SPINNING &YARN PROCESS ENGINEERING
Quality of any type Yarn depends upon mainly Fibre Properties at the Ring Frame Delivery and Processing Ability not the Fibre Properties at the Blend so UAK-1 checks the Fibre Properties at both stages and suggests what can be done ?
Optimization of Blowroom + Card Waste and Combing Waste-
With new Method of selection of fibre properties and with new methods of setting ratch distances to improve and control RKM CV% in Man-Made Fibres Blends to achieve optimum yarn quality with minimum manufacturing costs
For Raw Material,Waste,Slivers from Bale to Ring Frame Delivery
FROM 2 TESTS YOU GET MORE THAN 70 PARAMETERS. IT IS AN INNOVATION AND REVOLUTION IN FIBRE ,SLIVER AND WASTE TESTING
For Genetic Research:Processing and Spinning Ability of Cotton Fibres
For Spinning Mills : Optimization of cotton fibre selection and mixing and processing of all type of fibres.
For Research institutes: An innovative completely new testing device to research on Fibre Technology.
For Man-Made Fibres Manufacturers:Real Time measurement of Fibre Length and identifying over-cut and lower-cut fibres as well as behavior of fibres within blend especially setting of ratch distances with blends
For Cotton Classifiers :Quick Classification of Cotton
For Ginning Mills : Efficiency of Ginning and Fibre Control
For Spinning Machinery Manufacturers:Fibre to Machine Behavior Analyses
-For the first time in the world Measurement of Surface Damaged Fibres that could occur from machine harvesting to ginning to ring frame could be measured with White Spots Distribution Range % ( A new term for spinning technology ) developed by Itru .
-The real causes of neps in yarn could be more comprehensively analysed
-The answers of why "good " quality of fibre mixes end up with bad quality of yarn ?
-UAK-1 + DOES NOT ONLY TEST YOUR SAMPLES BUT ALSO PROVIDES KNOWLEDGE BASED INFORMATION TO IMPROVE YOUR QUALITY AND REDUCE YOUR MANUFACTURING COSTS WITH NEW SPINNING TECHNOLOGICAL TERMS AND DEFINITIONS.
NEW FIBRE /FABRIC ,SLIVER AND SPINNING TECHNOLOGY INFORMATION SYSTEM
We do not only test your samples but we also improve your ring and rotor spinning performance through our Knowledge Based Pc-Programs such as Card Fibre Transfer Test, Comber Data,Spin Plan,Spin Matrix,Spinning Performance;Fibre Mix Selection . Not only for cotton fibres ut cotton with blends and %100 MMF as well
Click here to Read Publications of Itru Fibre/Fabric Testers
UAK-1 TESTS ANALYSE AND SOLVES YOUR PROBLEMS
